Running
Wire
The wires for the elevator servo, the
tail beacon, the rear position light and
the two coax antenna cables were all
run through the black water tube seen
here.
This shows the connection of the
Comm 1 antenna (the one at the front
of the vertical stab). The ground will be
attached to the frame nearby.
The servo cables and other wires
were exited the water tube under
the seat area. They will be routed
to a wire buss which will be
attached in this area. The antenna
wires continued to the front exiting
behind the panel.
ELT antenna secured to the
baggage frame.