| Nose Gear |
Time to stand on your own three feet.
Bracket was a bit hard to drill the 1/4"
hole as it was done from the inside. It
required a 90 degree turn chuck and I
had to cut down the 1/4 inch carbon
bit...have you ever tried that? It takes a
diamond wheel on a dremel tool.
hole as it was done from the inside. It
required a 90 degree turn chuck and I
had to cut down the 1/4 inch carbon
bit...have you ever tried that? It takes a
diamond wheel on a dremel tool.
A shot from down
under.
under.