| Wing Repair |
This damage was
just behind the
gas tank. I first
took MEK and
rubbed off through
the tapes in order
to peel them back
just behind the
gas tank. I first
took MEK and
rubbed off through
the tapes in order
to peel them back
You can see the
bend it made. I took
my time and was able
to bend the dent out.
bend it made. I took
my time and was able
to bend the dent out.
I didn't want the
trailing edge to
buckle again when
I ironed the new
fabric, so I mixed
up some Hysol and
filled up the cavity
about 2 inches to
each side of the
boo boo
trailing edge to
buckle again when
I ironed the new
fabric, so I mixed
up some Hysol and
filled up the cavity
about 2 inches to
each side of the
boo boo
Now just to cut in
the fabric being
careful to match the
pinking lines.
the fabric being
careful to match the
pinking lines.
Going through the
painting steps again
painting steps again
Back to yellow. I will
even the paint out
by spraying one
more coat across
the top.
even the paint out
by spraying one
more coat across
the top.