| From a silver lining to a white cloud |
The third and last cross-coat of Poly
Spray
Spray
This sanding
system worked
good to sand
the Poly Spray.
The abrasive is
set on a
foam-like sub
straight.
system worked
good to sand
the Poly Spray.
The abrasive is
set on a
foam-like sub
straight.
This is the white Poly Tone that went
down next. Alan Nephews had good
luck with getting quite a glossy finish
by putting the paint into the freezer
overnight. I did this and it looks to be
working out well. The reflections you
see here are not wet paint but after the
initial drying.
down next. Alan Nephews had good
luck with getting quite a glossy finish
by putting the paint into the freezer
overnight. I did this and it looks to be
working out well. The reflections you
see here are not wet paint but after the
initial drying.
This was a light coat
of white to allow the
yellow to go down
easier. I did no
cross-coat here and it
is still glossing up.
Hope the yellow top
coat does this well. :>)
of white to allow the
yellow to go down
easier. I did no
cross-coat here and it
is still glossing up.
Hope the yellow top
coat does this well. :>)